Masnedø © All rights reserved
Masnedø Marinecenter A/S, Masnedøvej 4, 4760 Vordingborg
Denne side indeholder downloads for software demos og opdateringer. Tryk på linket
og definer hvor filen skal placeres.
Konsol og Envoy opdatering Vantage Pro2
Hvis
din Vantage Pro2 konsol software version er dateret November 28, 2005 eller senere
så kan du opdatere din konsol direkte fra PC. Denne fil er et stand alone tillæg
som vil opdaterer din Vantage Pro2 konsol eller Envoy direkte gennem Weatherlink
dataloggeren. Weatherlink med datalogger er nødvendig.
For at tjekke software version
på en Vantage Pro2 konsol så tryk og hold "Done" nede sammen med "+" pil.
Der er
nu på Trådløs og kablet konsoller dansk rulletekst i bunden af displayet. Deriblandt
er vejrudsigten blevet oversat.
Nedenstående versioner er med danks rulletekst på displayet men kun med en 1.73 opdatering.
Vantage Pro2 trådløs Vantage Pro2 konsol dansk
Vantage Pro2 kablet Vantage Pro2 konsol, dansk
Husk: Der er forskel på Kablet og trådløse modeller i softwaren. Nedenstående versioner er kun med engelsk rulletekst.
NNOTE: This firmware is only for Vantage Pro2 Wireless Consoles (#6312 or #6312OV).
Firmware version 1.90
CWOP uploads will now contain 2 min average wind speed, 10 min wind gust and direction of gust, last 15 minutes of rain, last 1 hour of rain and Altimeter. Must also have WeatherLink software v5.9.0 or later to use this feature.
Fixed clearing of yearly ET history data.
Fixed a bug that caused the barometer value to have a large error after updating to firmware version 1.82.
Fixed a bug that when changing units in software caused the console to not reflect the change immediately.
Fixed graph so that zooming to a different span always starts at the first point.
Fixed display of historical yearly rain totals over 813 mm for 0.2 mm rain collectors (highs, lows and graphs).
You can now only get to the Receive Diagnostics Screen from the Current Screen.
NOTE: This firmware is only for Vantage Pro2 Cabled Consoles (#6312C).
Firmware version 1.90
CWOP uploads will now contain 2 min average wind speed, 10 min wind gust and direction of gust, last 15 minutes of rain, last 1 hour of rain and Altimeter. Must also have WeatherLink software v5.9.0 or later to use this feature.
Fixed clearing of yearly ET history data.
Fixed a bug that caused the barometer value to have a large error after updating to firmware version 1.82
Fixed a bug that when changing units in software caused the console to not reflect the change immediately.
Fixed graph so that zooming to a different span always starts at the first point.
Fixed display of historical yearly rain totals over 813 mm for .2 mm rain collectors (highs, lows and graphs).
You can now only get to the Receive Diagnostics Screen from the Current Screen.
Cabled console will now gracefully handle a serial command terminated with two of \n or \r characters.
NOTE: This firmware is only for a Vantage Pro2 Wireless Weather Envoy (#6316 or #6316OV).
Firmware version 1.90
CWOP uploads will now contain 2 min average wind speed, 10 min wind gust and direction of gust, last 15 minutes of rain, last 1 hour of rain and Altimeter. Must also have WeatherLink software v5.9.0 or later to use this feature.
Fixed a bug that caused the barometer value to have a large error after updating to firmware version 1.82
NOTE: This firmware is only for a Vantage Pro2 Cabled Weather Envoy (#6316C).
Firmware version 1.90
CWOP uploads will now contain 2 min average wind speed, 10 min wind gust and direction of gust, last 15 minutes of rain, last 1 hour of rain and Altimeter. Must also have WeatherLink software v5.9.0 or later to use this feature.
Fixed a bug that caused the barometer value to have a large error after updating to firmware version 1.82
Cabled console will now gracefully handle a serial command terminated with two of \n or \r characters.
NOTE: This firmware is only for Vantage Vue Consoles (#6351, 6351M, 6351UK or #6312EU).
Firmware version 2.12
Fixed display of historical yearly rain totals over 812 mm for 0.2 mm rain collectors (high, lows, and graphs).
Range of LCD contrast adjustment reduced by half.
Now you must be in the Current Weather Screen to move to the Receive Diagnostic screen.
Vantage Pro, Pro2 Weatherlink 5.9.2 opdatering
Husk at fjerne Weatherlink USB dataloggeren
fra USB porten på din PC før du installere opdateringen.
What's new in 5.9.2
Fixed the APRS data transfer when using Vantage Pro2 firmware version 1.90.
Fixed slow internet transfer issue introduced in WeatherLink version 5.9.1.
Corrected the unit label for "In Air Density" in the "Plot" screen, if it is set to "kg/cu m"
What's new in 5.9.1
Increased effectiveness in detecting a USB driver dropout. Driver will be restarted automatically and a note will be put into the View Log fie.
Increased a timeout value to ensure High/Low data is received before uploading to CWOP or a personal website. Eliminates the “Data read error” when performing these uploads.
Fixed Open Plot problem introduced in 5.9.0.
Air density unit can now be set to “kg/cu m” or “lb/cu.ft”.
Streaming Data Utility updated with a new field of "Max Effective Rain Total".
Changed default values in Streaming Data Utility.
.NET is not included in this web download. If needed, installation will download it from Microsoft.
Version 1.0.8
Fixed a bug that caused the data logger to stop uploading data periodically. This halt in uploading was caused by a PING message sent by some routers.
Changed data upload format to reduce upload bandwidth to the server and fix missing high/low data.
Added support for 2 DNS servers in dynamic IP address mode. If the data logger cannot successfully resolve the WL.com name through the two given DNS servers it will try with the Google public DNS at address 8.8.8.8.
Config page always displays the 1st DNS server even if it is using the Google public DNS server.
WeatherLink for Windows 4.04 opdatering
Ny version som løser flere små problemer.
Opdatere hvilken som helst Weatherlink 4,x installation til version 4,04. Kræver
at man har originalt detail- produkt.
Fil størrelse: 329K
Til perception, wizard og monitor